Протоколы и процедуры в сети радиодоступа LTE LTE Protocols and Procedures
Назначение

В курсе дается углублённая информация о принципах радио доступа, архитектуре сетей и сигнализации систем LTE, а так же услугах EPS точки зрения QoS. В курсе рассказывается об интерфейсах радио доступа в LTE таких, как X2 и S1 и соответствующих протоколах контроля X2AP и S1AP.

Также в этом курсе рассматриваются протоколы наследующих интерфейсах: RRC, PDCP, RLC, MAC и физический уровень радио интерфейса.

Целью курса является предоставление рассказать слушателям о видах трафика в EPS.

Description

This course gives an in-depth understanding of the LTE Systems radio access network architecture and signaling, as well as the EPS Bearer Service, End-to-End service from QoS aspects. It covers the LTE radio access interfaces, such as X2 and S1 and corresponding controlling protocols X2AP and S1AP.

Also covered in this course are the protocols used over these interfaces: RRC, PDCP, RLC, MAC and the physical layer for the radio interface.

The purpose of the course is to enable the students to understand complete traffic cases in EPS

Цели курса

EPS архитектура:

  • Состояние основных функций сетевых элементов
  • Список интерфейсов

Основные функции протоколов, используемых в EPS.

  • Сигнализация между UE и EPS
  • Основные функции Radio Resource Control (RRC), Packet Data Convergence Protocol (PDCP) Radio Link Control (RLC), Medium Access Control (MAC), физического уровня и их взаимодействие.
  • Взаимодействие протоколов eUTRAN и понимание логических, транспортных и физических каналы

Качество обслуживания в LTE/SAE

  • Взаимодействие между между службами EPS и радио доступом eUTRA.
  • Атрибуты радио доступа eUTRA.

Протокол RRC

  • Взаимодействие между RRC и нижними уровнями управления.
  • Структура RRC уровня
  • Состояние RRC служб и разница между состоянием соединения и состоянием ожидания.
  • Функции и сервисы в RRC такие как системная рассылка, пейджинг, выбор соты и слежение за перемещением

Протокол PDCP

  • PDCP функции и службы, таки как сжатие заголовка и шифрование

Протоколы RLC и MAC

  • Объяснять функции RLC
  • Различные режимы RLC (прозрачный, неподтверждённый и подтверждённый режимы) и структура DPU, используемая в этих случаях.
  • Функции MAC, такие как планирование, HARQ
  • Архитектура MAC, её подразделения и их использование в транспортных каналах
  • Составляющие MAC Packet Data Unit (PDU)

Интерфейс X2/S1 и протокол X2AP/S1AP

  • Основные функции и процедуры в сигнальном протоколе X2AP
  • Основные функции и процедуры в сигнальном протоколе S1AP
  • Основные функции и процедуры в пользовательском протоколе GTP

Наиболее важные варианты конфигурации

  • Автоматическая конфигурация базовой станции

Обеспечение мобильности на LTE

  • X2 Handover
  • S1 Handover
  • IRAT Handover
Learning objectives

On completion of this course the participants will be able to:

EPS Architecture

  • The main functions of the network elements
  • List of the interfaces

Main Functions of the Protocols Involved in EPS.

  • Signaling between the UE and the EPC
  • The main functions of Radio Resource Control (RRC), Packet Data Convergence Protocol (PDCP) Radio Link Control (RLC), Medium Access Control (MAC), the physical layer and their relations
  • The interaction of the eUTRAN protocols and the mapping of logical, transport and physical channels

LTE/SAE Quality of Service

  • The purpose of EPS Bearer Services and eUTRA Radio Bearer
  • Attributes of the eUTRA Radio Bearer

RRC Protocol

  • The interaction between RRC and the lower layers in the control plane
  • The RRC layer structure
  • The RRC Service States and the difference between connected and idle mode
  • The functions and services of RRC such as System Information Broadcast, Paging, Cell Selection and Mobility

The PDCP Protocol

  • The PDCP functions and services such as header compression and ciphering

The RLC and MAC Protocols

  • The RLC functions
  • The different modes of RLC (transparent, unacknowledged and acknowledged mode) and the structure of the PDU involved in these cases
  • The MAC functions such scheduling, HARQ
  • The MAC architecture, its entities and their usage for the mapping of transport channels
  • The contents of the MAC Packet Data Unit (PDU).

X2/S1 Interface and the X2AP/S1AP Protocol

  • The main functions and procedures of X2AP signaling protocol
  • The main functions and procedures of S1AP signaling protocol
  • The main functions and procedures of the user plane protocols GTP

The most Important Configuration Cases

  • Auto configuration of the eNodeB

Mobility in LTE

  • X2 Handover
  • S1 Handover
  • IRAT Handover
Способ обучения

Этот курс основан на теоретических лекциях с инструктором и теоретических упражнениях, проводимых в аудиториях.

Learning situation

This course is based on theoretical instructor-led lessons and theoretical exercises given in a classroom environment

Целевая аудитория

Целевая аудитория на этот курс: проектировщики сетей, инженеры-проектировщики, системные инженеры.

Target audience

The target audience for this course is: Service Design Engineer, Network Design Engineer, System Engineer

Пререквизиты

Слушатели должны быть знакомы с радио интерфейсами LTE или успешно окончить курс: LTE Air Interface.

Prerequisites

The participants should be familiar with radio interface solution for LTE or successful completion of the following course: LTE Air Interface.

Продолжительность – 4 дня Duration is 4 days